Failing to initialize is obviously an issue! Pop the lid off and make sure the connectors for the motor and sensor board haven't been dislodged -...
Download and install the latest version of the SBIG Driver Checker from our web site. That will automatically include the latest driver files, so...
I'll ask @Tim to respond. FYI we are closed Monday (statutory holiday here).
Click the Setup button just below the Control Via drop list. Please read the appropriate manual section:...
If you're going to make something custom, the easiest thing to do is purchase the connector, as specified in the User Manual on Page 38....
Control Via / ASCOM, use Chooser to select Device Hub.
Shouldn't be an issue. Just don't accidentally wire the power backwards! The camera is protected against reverse power, but we can't stop 12V...
Set up Device Hub to connect to The Sky. Set Control Via to connect to Device Hub.
The log shows values for Corr X and Corr Y on every line. These are the commands being sent out to whatever Control Via is set to. Whatever...
If you look at the track log, it shows that it was sending corrections throughout. If there's an issue it's downstream.
I'll send you a private message.
See if there's a firmware update for the camera. Some of our CMOS models have a firmware update to ensure that the camera doesn't lock up if the...
It sure looks like your AO is oscillating for some reason. I suspect it will have to come in for service. @Tim should be able to help you with that.
What firmware is actually in the camera? Also, does it give you an error if you use the Low Gain mode?
Does it do the same thing in V7?
https://cdn.diffractionlimited.com/help/maximdl/MaxIm-DL.htm?rhtocid=_3_9_0_0_1_6#rhtocid=_3_9_0_0_1_6&t=Track_Log.htm
That's baffling. Are you running the latest DL Imaging drivers?
Can you generate a track log and upload that?
I am able to perform HDR imaging in my observatory with an AC4040. No issues. It is running firmware 15.
@Tim can help you with the AO-X. Check your guider settings. On which (mechanical) axis is the problem occurring? Do you have a backlash...
Separate names with a comma.
