There has been some progress on the AO driver in MaxIm DL, but to be completely honest I'm not certain we have it absolutely perfected yet. We're...
Remember you are working with someone else's software here. We have absolutely no control over it whatsoever. You should bring this up with...
That is outside our control. ASCOM doesn't have an AO interface standard. TheSkyX would have to support it through our native API.
Yes it is easily repaired. The "glue" is high quality RTV. We use three spots to avoid stressing the glass, which could result in optical...
Please check the pick-off mirror - see if it's shifted in its mount.
The temperature readout on the STF is relatively low precision, but it regulates better than what you see.
Sure, just send it back with the camera, and be sure to note that in the RMA. Suggestion - if you have another brick handy, try swapping....
I'm afraid so. Everyone is on holidays right now, but I'm sure @Tim can help you when he gets back.
If you like, maybe next week @Tim could remote in to a computer and look at the settings. TBH I don't think this is a settings issue, but it's...
I don't know your camera's serial number, so I can't look up the exact values. The last 16200 we built had EGAIN 0.58 and an offset of 992 (A/D...
It looks like it's not clocking correctly. Generally that's a hardware thing. There are only two things that could impact clocking that aren't...
I'm afraid there aren't any next steps, aside from RMA.
I moved your post back to your thread - less confusing. You were referring to...
The off-axis guider needs to be behind the AO. It won't work otherwise. As soon as there's an offset, the AO will tilt to try and correct it,...
Very nice! You're certainly making good use of the camera! Can't wait to see the final version.
Nice thing about AO is it'll work as long as the calibration is in the ballpark. Ideally, though, you'd want it to be accurate. I'm planning...
The AO won't tilt 45 degrees during calibration. It will be pretty close to up/down and left/right. Unless you somehow have the AO attached at a...
Good to know on Bin 1 versus Bin 2. It's hard to simulate this properly in the shop. If we can get some clear skies here I'll do some testing,...
None of our dealers stock desiccant plugs, so they have to order from us, receive it, and then send it along to you. We do have an order from...
Re StackPro calibration, in addition to Light, Dark, and Flat you will need matching Flat-Darks. Calibration will work normally despite the...
Separate names with a comma.
