Nice image!
For SC-3, counterclockwise = focus is all the way in. Therefore moving the mirror outwards from the optical axis should shorten the distance to...
It would take me an hour to pull up the drawing. I'd have to set up an old computer to run the old software. Pretty sure it's 4-40.
The fuses are in the camera. We don't have any boards left. The repair is straightforward for anyone with experience in surface mount soldering.
User manual says 0.92". https://diffractionlimited.com/wp-content/uploads/2016/03/USBmanRev14.pdf - Page 37
It's already been added, and will be released with the next minor update. Assuming all goes well it should be released in December.
Yes, @Tim will provide.
I found the CFW serial interface developer's kit and posted it: https://cdn.diffractionlimited.com/downloads/CFW10DevKit_1r0.zip
I recommend returning the camera for service.
Yes, the chamber was opened; however, we have a process to handle that safely with windowless sensors. A temporary sensor window is installed....
Still looks like frost to me.
Reporting the wrong camera model indicates that the EEPROM has been corrupted. That is probably fixable. The all zero image is concerning...
Here are McMaster part numbers for the O-rings used in the ST-2000 housing: 9557K67 (there are two of these) 9557K125
I checked and we have an ample supply of boards here. @Tim can provide RMA instructions.
We do have some parts available for ST-i. Please contact @Bill at sbig dot com.
Not sure... I'll have to defer that question to @Tim or @Bill.
The digital boards are compatible, but the EEPROM settings would have to be updated.
Unfortunately that camera model is over 10 years old, and parts are no longer available for it. I'm afraid we cannot repair it.
Nico, I'm afraid this could be a hardware failure; hopefully not the camera. First thing to check - use a different USB cable and plug the...
Martin, StarChaser supports up to 4x4 binning, though anything above 2x2 is done in software. The ASCOM driver supports all DL Imaging models....
Separate names with a comma.
