I'd like to re-submit my question from May 4 on AO-X track rates. Over the last several sessions the rate is conspicuously 'stuck' at 2.5Hz....
I've witnessed this "slow track rate" several times and a reboot cures it every time. It's curious--2.5Hz must have some significance...a default...
Great Doug, thanks. I will make use of the configuration feature for rapid switching. I think the mistake I'm making is trying to switch...
Bob, thank you for your help. I'm glad to move this to your forum. Just to be clear...I understand the ACP procedure completely. Also note...
The slow guiding is not an always situation. I reported on this yesterday (236AM post). Guiding routinely hit 7.5Hz. I don't know why it...
Hi Bob... What I normally do is plate solve my way to 0PA. I can record mechanical angle in my telescope control system so getting to 0PA is...
Hi Bob! Thanks for your input on this. I should clarify the workflow a bit better. I calibrated the AO - Locate, Calibrate Drive, Calibrate AO....
Another experiment in tonights session shows speeds consistently above 6 and topping out at 7.5Hz with exposures around 0.06s. RMS wander is...
My AOX rarely achieves a rate about 2.5 Hz. I've seen it go higher, but that was some time ago with a different camera of the same model. What...
Hi Doug... Seems I always forget some pertinent data. DriverChecker reports all drivers and firmware up to date. Maxim is up to date as well...
I've recently experienced what appears to be RBI issues with my 16803. I don't use RBI, but nevertheless it seems to flash from time to time. I...
Hi Tim... It's been a while since I've been able to test the system. The 16803 just got back to me and I installed it yesterday. The abend...
https://onedrive.live.com/redir?resid=1EB2DE63A1E30B50!5639&authkey=!ACrkuARv2E8uOH0&v=3&ithint=photo%2cjpg Yup....fog of war. The camera is new...
First light with new 16803. Worked well-ish for a while, then Error 17 - Shutter error. What can be done? I say worked "well-ish" because the...
My RGH might be dead. When taking an image it's stuck on "reading CCD camera". I've experienced abends on Maxim v6.12 running under ACP. These...
What is the BFD for the RGH? Where can I find this in the documentation? Thanks, -Lloyd
I have an STX16803, AO-X and RGH connected to operate with the AO-X. Is there a configuration in Maxim that would allow the system to bypass the...
Separate names with a comma.
