I tried the above, as well as using my laptop, no device shows up. A TeamViewer would be much appreciated. I will email you my contact information.
I have 2.7.1.0. I followed the instructions and updated these just before the update.
My camera was running Rev13 and I attempted to update it to Rev15. The process completed successfully, and requested a power cycle. The power was...
I reduced the High Gain to 1400, reduced the ADU to 10% on the flats, took 20 each of darks and flats, and all the craziness is gone! Albeit on...
I found this online which I think is my problem: “When using the ASCOM V2 driver with either ASCOM Direct or Telescope guide methods in MAXIM, you...
Thank you both for this information. On my next visit to my observatory, will add the following changes to my work flow: 1) Reduce the ADU count...
I just started using my AC4040bsi and am grappling with the 4 quadrant pattern. Reading the above I will lower the ADU on my flats. I am using a...
I am using an AP1100 controlled thru APCC, and yes I am using your cable. The same set up as the STX which worked fine. Everything, Maxim, DL...
Running windows 11, Maxim .30, and recently released dl drivers with my SC3 / AC4040, and a guider cable. The guider calibrates perfectly in both...
My AllSky 340 from 2016 had the same issue, now I can no longer connect. I am in Canada. Can you send me an RMA request form link?
I have had this before where MAXIM values were not the same as PixInsight. My max values were around 46,000 as well. I never got to the bottom of...
I have 2 STX Guiders, one in New Mexico and one in Canada, great devices. Recently I interchanged the 2 along with the cameras, and the one I...
I have the same problem with my filters chipping at the edges. They are Astrodon filters. I am considering adding electrical tape to the edges to...
I am going to order the STX guider as it will allow me to use the STX on a shorter focus telescope as well. Is Owen's fix incorporated into V20?...
Colin, I received the the repair email, but I see there is a minimum charge plus shipping. I can’t help but think that in the end I am going to...
Colin, I am at the observatory now and just tested the guider at -4C, as opposed to the -18 to -25C when I was experiencing the delay. At 1sec...
Colin, Here are my MAXIM settings for both the AOX and RGH configurations. I have also included my ACP preferences tab as well as the settings...
Colin, Thanks for your response. I have included 2 photos, and the train is: CDK 12.5" Gemini focuser/rotator AOX MOAG which houses the STX RGH...
Does a non-response from SBIG mean that I should address this with my dealer?
My guider now needs 4 sec or more to deliver images. Anything less and I do not hear the shutter. Is there a way to keep the shutter open? Thx
Separate names with a comma.
