Colin, I did 4 days ago and it has held up to a substantial freezing rain storm already, with no new moisture inside the dome. I note however...
I usually use my configuration in AOX mode, but want to use normal AO guiding. However, my guider has a one second delay before opening. A one...
Colin, The moisture is less than before, but it did accumulate again inside the dome. I have opened it up and will leave the dry inside for...
For sure the heater is on. I have made a sketch instead. It is a small chip at the camera base. Any clue what this is? I noted that 2 screws on...
Doug, I opened it up and cleaned everything. I removed the black plate as well to get at the chip on top. It has a wire lead so I thought it...
Doug, I accessed the camera and the moisture is inside the dome. The contacts appear to be clean and the 12V is good. I will use some DEOXIT to...
Colin, Thanks for the link as I have been looking for a product that can fly with me and they make a pen. My bad, that’s DEOXIT not DETOXIT, and...
Colin, Is there no forum that you don’t monitor? Don’t get me wrong, I appreciate the advice. The power supply is working on the observatory...
Tim, As the winter progresses, I will have less and less ability to access this camera as I need to erect scaffolding to get to it. I would like...
I am running version 1.0.37.0 on a Windows 8 machine. I have been careful to run it only at night in the summer, but run it full time in the...
Adam, Opps, I was doing this incorrectly. I did not realized where the software was loading the .config file from (i.e.: not the x86 directory)....
Adam, I tried copying your user.config to the SBIG AllSky-340 directory, same error. I tried renaming it SBIG All Sky Camera.config (with and...
Here is the zipped file. Thx
Adam, Here is my config file. Opps - I cannot upload a config file. Can I email directly? I was using a Trendnet TU-S9 on a Port which I have...
Following the advice of a systems programmer (which I am not), in the Programs menu, Turn Windows features on or off, I...
I have a problem connecting my AllSky-340 Camera after having several unexpected shutdowns. I have tried to remove the config file as described in...
I have the same problem (after having several unexpected shutdowns). I have tried to remove the config file as described above but the software...
Have you tried different guide stars? I have had issues where the software is tracking on one, then heads off to one side but comes back. Playing...
FYI I use my rig down to -30C. Any problems always turned out to be none temperature related. Mark
Tim, As I mentioned above I was tinkering with patches to fix calibration of the drive in MAXIM and then the AO stopped working. It won't move...
Separate names with a comma.
