Take a look at an 300s image, the vertical banding on the right side. It only gets much more visible after stacking.
Hello, I was in contact with Bill and he suggested that my sensor is going bad and it's not an electronic issue. I know that a used sensor is my...
Well it looks like some of my past issues with this ao-x was caused by more than just software glitches. It looks like one side of the lens is...
You should really consider getting the Optec 0.62, much better quality with more back focus than the Meade 6.3. The Optec specifies 105mm back...
Colin, I resolved this issue. Not the software or the AO-X fault, it was (is) my mount. My guiding without the AO is bad as well, far worse than...
It might be comparing apples to oranges but I seem to remember with my Ao-8 the tracking speed number in the X and Y were in the 50-60 range....
Colin trying it out now, really don't see much of a difference. It took many try's but I did get to calibrate the AO, although it still not...
Yes somehow I reinstalled 5.0.2.0. I rolled it back to 4.99 build 7. I'll give it another try tonight, thanks.
Colin, I have the mount controlled using "telescope", not guider relays. I didn't try regular guiding with this set up. Although during mount...
No luck with my issue Colin. The plug in had no effect. I did notice tonight during calibration of the AO, I always got the message " Star moved...
I'll give it a try Colin, the weather should cooperate tonight.
Yes, it is an acf model.
I picked up a used STXL11k/ FW8G/AO-X recently, I have this mounted on my pier to a CEM120, /Meade 12" F8 (2438mm) and a Moonlight Litecrawler....
It's an older unit. X13020184
Hello, Tested out my 11002/fw8g/ao-x last night for the first time, some but not all of my images have banding issues either vertical or...
Colin, it does say this. Can you send the updated driver please. The FW was installed with the camera when it arrived today, I don't see or hear...
I just picked up a used STXL 11k with a FW8G-STXL FW. Maxlm Dl ( 6.26) gives me error codes 6 and 17. The filter wheel will not connect. I am...
My second try on M31, learned a few more tricks since last fall. Meade 70mm astrograph, Aluma U694, Astrodon filters. 25x300s Ea RGB 47x300s Lum...
If that's a 2.5"CFL moonlight the adapter is easy and the best solution, a 68mm to stl adapter from moonlight, threads right in to the AO-8. This...
My first elephant trunk image. Meade 70mm astrograph, AlumaU694, 51x300s ea Ha,Oiii and Sii.
Separate names with a comma.
