Sometimes there will be a USB4 device or Thunderbolt device, or Thunderbolt Controller, separate from the Solo device, but it is part of the same...
Here's what I know: FPGA Rev 0 is the internal default in case of a failed firmware update. It's so the camera cannot be "bricked", however you...
Hi Mark, Glad to hear you got it installed. 1. Check USB selective suspend/power management settings 2. Check the power management settings on...
Did you set the IP in the camera to something other than the default? On the PC, did you set a static IP (eg manually set a fixed IP address) and...
There's a new update to the ASCOM Platform available - version 7.1.3: https://github.com/ASCOMInitiative/ASCOMPlatform/releases It fixes a logging...
It is a straight through cable. Looking forward to seeing this. If we can't get any further, let's schedule a remote access session. I'm on EST...
a)The filter selection will be greyed out if you have selected Dark, Bias, or Autosave sequence. b) Thanks for that. I'm discussing with...
Cameron, I have a few more questions: a) What was the original filter wheel problem? b) The original screen shots you posted from MaxIm LT are not...
After attempting the firmware update, did you quit (exit) all applications, and then did you power off the camera and wait 30s for the capacitors...
Hi Cameron, Ok, something has failed in the update process. The good news is the camera is not "bricked", so can still be updated. Firmware "0" is...
Or are both cable ends d connectors?
Not the DE9 connector. The other connector that is round.
Can you verify that the ASCOM driver settings are as follows: [ATTACH]
What I meant was does any SOFTWARE successfully change the position? OK good, it sounds like the software and drivers are set up properly....
Hello, can you identify yourself? We don't know who HOGS team is. It also appears you are using out of date software and drivers. In order to...
I'm not familiar with that software. Have you asked the author of Astro Art 9 for advice? Am I correct in assuming Astro Art indicates that...
That's odd. Check your driver and application versions.
That looks perfectly normal for a filter wheel. Are you having a problem?
That filter wheel was made by Apogee, not the old FLI. Apogee got bought by Andor, which in turn was bought by Oxford Instruments. It's been a few...
Windows automatically prompts when MaxIm or DL Config x64 tries to find the camera on the network; There is a dialog that comes up, and it has a...
Separate names with a comma.
