There are two things you would need to use an AO-8 on a modern camera. You would need an adapter cable as the connector on the StarChaser is...
It would be the SC-4C, and yes, you have the correct stack-up. If you have an older AO-8 it may be necessary to change the adapter plate on it....
Adorama never seems to update their site! That product has not been available for years. ON Semiconductor discontinued all of the Kodak CCD...
Could you post a photo of the entire filter wheel? There are two versions of the wheel and I want to be sure which one you have.
Are you sure you're getting an STT-8300M and an FW5-8300? Those two are not mechanically compatible. I would assume you're getting an STF-8300M...
I can't comment on third party software. The pedestal is an offset generated by the camera hardware, which ensures that pixels don't go...
Unfortunately, no. If you would like to send it in for service, please fill in this form: http://diffractionlimited.com/request-rma
From left to right: Fan Power Fan RPM Sensor Ground You should check the fan data sheet, but if I had to guess, you should swap the yellow and...
Okay, here's the histogram for the raw dark frame: [ATTACH] It looks like a wraparound situation. The bottom half of the histogram is at the...
Doesn't look like a software issue. We can't diagnose this from processed files - raw, unprocessed images only please. From your description...
Sorry for the delay. Adam is our expert on the DLAPI drivers, and he's off on Christmas vacation. I did some experiments and found one way to...
I can't recommend a specific product, as I have not tried them. You'll want an eyepiece-style 1-1/4" diameter camera with the sensor very near...
Unfortunately the symptoms do suggest a hardware failure.
Very cool! Thanks for sharing.
Yes, Diffraction Limited originally built these cameras, but they have been obsolete for 15 years. The cameras were originally shipped with...
Just because you can't see frost, doesn't mean there isn't some accumulating under the sensor. The cooler is down there. The pins are down...
Perhaps you are getting some frost accumulation behind the sensor, which could cause electrical issues. It's colder on the back of the sensor so...
The beta program is progressing. You are welcome to join if you want to contribute.
Screws are 4-40. The disk is 0.158" = 4 mm thick. The screws must not protrude. The holes are flat with the plane of the disk. Note that the...
The holes are 2.175" apart, and are centered relative to the aperture.
Separate names with a comma.
