Turn off and disconnect the camera. It can't update when the Windows device driver is in use.
You need to set what filters are in which slots. Camera Control Window - Setup Tab - Camera 1 column - [Setup Filter].
Could be. You'll need to check backfocus.
The 3" barrel adapter is not threaded. The 10018 STX adapter that came with the camera HAS 3-inch 24 TPI threads. PlaneWave makes this, which...
The pattern is this: 1. 10018 nosepiece -> STX camera 2. 10018 nosepiece -> FW5-STX -> camera 3. 10018 nosepiece -> STX Guider -> FW5-STX ->...
If you made a longer pick-off arm, the sensor might not be focusable. Also, are you binning the guider 2x2 ? That will give you a more compact...
Well maybe the problem is SGP and not your hardware. SBIG Driver Checker does have logging options. However, since it works fine with CCDOps......
HI @Timothy Benko NJAA Have you had a chance to try the 6.31 beta ? We've released a new updated beta. Same link as I sent previously.
What are you talking about?
Do you mean STC-7 (the modern CMOS APS camera) or ST-7 (the 20+ year old CCD) in that picture? There is no such thing as an ST-7C and that has me...
That's not going to work. Backfocus calculation: STX camera 35.3mm AFW-10-50SQ filter wheel 14.0mm (This is the thinnest wheel). FW7 is 32.9mm....
If it is that smeared, then yes, it will not be as obvious. The SNR level could be adjusted lower (to like 10 instead of 50) and it may still be...
Comparing the sensors is not easy; almost apples and oranges. It also depends which vintage of ST-series camera you have. Some had the Texas...
The STX has a dovetail nosepiece with an internal 3-inch 24tpi thread. You can find photos of all STX nosepiece options here:...
I'm glad to hear this is sorted out.
Gary, I think something very simple must be wrong. The AO must be physically connected to the SC-3 I2C Auxiliary port, as the SC-3 provides power...
You'll need an adapter of some sort.
PM sent.
Mark, I agree with Bob. Also, mount behaviour differs by model and manufacturer and driver.
Thank you.
Separate names with a comma.
