Thanks Doug..... Here is another M42 with 2 minute exposures for each RGB channel. Short exposure to not blow out the core but even 2 minutes...
Here is a m42 taken with STL-11000m, three 5 minute R-G-B images. (45 minutes total) Scope AP R-H 305mm @ f/3.8 Would like to have "HDRed' this...
Nice image Doug! The new camera is impressive and being in an experts hands helps. Attached is the image with some processing that I was trying....
Thanks Collin... A PS plugin (Astra Image) deserves the credit. The before / after is amazing with the results looking like focus was greatly...
A bit early in the season but an M45 for your consideration. 4 x R-G-B @ 5 minutes each. STL-11000 AP R-H scope 305mm f/3.8 A Photoshop...
== S-0-L-V-E-D == In case someone has a similar problem as the subject of this thread, turns out the problem was not in the USB. A post on some...
Would an AO-8 correct the belt problem or at least "greatly" reduce it?
PM sent to your email. Tim
Thanks Doug.... The STL has been trouble free for close to 15 years and the software as well. I have an STC-7 on order and may relegate the STL...
M31 :: stack of 3 each R - G - B at 10 minutes each. M45 :: single mono image exposed 10 minutes. A little early int eh season for M45 as it...
Terrific image....
Hi Doug, That's good news. I have Maxim DL Pro and also use ASCOM so shouild be covered. ASCOM is a nice package for tying all the Astro gear...
Does anyone know if CCD Autopilot and/or CCD Commander will be able to use the Stack Pro™ image capture. Will either program be able to kick off...
Thanks Colin...
M8 and M20 taken with STL-11000 as LRGB. A stack of 15 images, 5 minutes each. Scope: AP 130 GTX with 0.74x tele-compressor operating at f/4.66....
Hi Collin Thanks for the tips and the great details on what to check. Beg to report it didn't help although USB was set in the sleep/power save...
Very good, thanks Doug.... Now back to imaging.... Tim
Hi Doug Thanks for your expert advise. Turns out it was the USB link at the laptop. The laptop should handle the transfer speed no problem so...
Some questions about an ST402ME : The SBIG drivers are up to date as is the Windows 10 system. When trying to update firmware via the...
Some questions about an STL-11000m : The SBIG drivers are up to date as is the Windows 10 system. When trying to update firmware via the...
Separate names with a comma.
