You need to think of StackPro exposures as being effectively a single long exposure. Yes if an airplane flies through during the third...
[IMG] All users with an active subscription, i.e. license expiry date on or after June 28, 2024, can download and run MaxIm DL Version 7.0.0 at...
The read noise is lower so you can do much shorter exposures. That also helps with the more limited dynamic range in High Gain mode. Personally,...
I looked up your camera in our production database. Aluma AC-4040-C2 built 2021/01/22. All QA tests show normal. As I said this isn't a known...
Hmm... not seen that before. It looks rather like the columns are out of order. Not sure how that would happen; perhaps somehow the sensor got...
Okay so you need a negative temperature coefficient, Curve T, 3000 ohms at 25C. I'm sure you can find a suitable substitute out there. Check out...
It is a Quality Thermistor Inc. part number QT1206-T-302F. That is all the information I have available. I think you'll find Google is not...
I looked up the part number, but it isn't very helpful because the part is long obsolete and there's no information available on it.
Beautiful!
What software are you using?
If you're running ACP, MaxIm DL doesn't even know what the PA is, because the rotator wouldn't be connected to MaxIm DL. It would be controlled...
Can't hurt - use the SBIG Driver Checker.
Looks like amp glow - as if the readout amplifier wasn't powered down during the exposure. If I had to guess, it might be some kind of rare...
It appears both cameras require service. @Tim can help you with the RMA procedure.
I've moved this to a separate thread, as it is a different issue. Does your camera produce an output that is either all 0 or all 1000 ADU? If...
Sure, it could indicate an internal power supply failure in the camera. If returned for service our team will most likely replace the main...
There is no sensor data in those images. It appears the camera has failed. I'm sure we can repair it; if you would like to proceed with that,...
You can see sky so it's getting light. I believe in another thread I recommended trying the moon. Try that again, and if you do get light, move...
See https://forum.diffractionlimited.com/threads/prevent-disconnects-turn-off-usb-selective-suspend.7848/ Best have someone at SRO take a look at...
What kind of telescope are you using?
Separate names with a comma.
