Looping in @Bob Denny the author of ACP Expert. Mike - are you using DL Imaging FW to talk to the FW7-STX via the AC4040? Here's an example with...
Don't worry about the camera, it seems to pop back on... and is a bit of a mystery why at the moment - seen this a couple times. Usually the...
Ok, let us know how it turns out. Yes, it's important Camera 1 is AC4040* and Camera 2 is SC1300*. Also, there's a possibility there's a file...
Resolution was simple: Drivers were already installed, camera already happy in Windows 11, MaxIm configuration needed to be set when the camera...
On the phone now.
PM sent to you with details.
Lots of interesting detail in there!
How did you update the firmware if the computer doesn't see the camera?
If ACP is driving MaxIm, it's the boss making the decisions. MaxIm is supposed to just do what it is told.
Can you confirm the following: - Is the FW7-STX plugged into the AC4040? - Firmware version in AC4040 v13 - DL Imaging Driver version eg 2.4.0.0...
Can you be more specific on "horrible"? Are you subtracting dark frames?
We have a beta version that might be usable. I'll check with @Adam Robichaud on Monday (your Tuesday) after I do a few quick tests here, and let...
Tom, after you did (c), did you run SBIG Driver Checker and go through the update process? If your computer is internet accessible, how about we...
Mike - I'm late to this thread, but have a couple comments. You might want to get current on everything. Check that you have the latest firmware,...
Are the correct LEDs lit on the side of the camera? eg the Power LED, no low-voltage condition?
Hi Tom, If the Device Manager isn't showing the camera, then there may be a windows problem or missing driver, or a bad USB cable, or a hardware...
Comments added in the other thread. This thread is closed.
Contact Bill Lynch @Bill via bill (at) sbig (dot) com
Here's a thought: Try skipping Dual Wheels, and just see if you can get a single wheel to connect and operate through that Andor CCD/EMCCD (SDK2)...
Is the FLI Filter wheel pair being controlled by the old Andor driver or the new Andor driver? e.g. am trying to figure out if MaxIm is sending...
Separate names with a comma.
