I agree with Bill. The camera does not just suddenly decide to change it's cooler set point. This sounds like a software bug or system problem....
By definition, a BIAS frame is a zero second dark exposure used to sample the inherent instantaneous bias charge present in the CCD sensor array.
Can you use Upload a File to post a photo of the connector problem?
Don't plug the camera guide port into the classic LX200 - the Classic's chassis is not at ground potential, and the ST2000 isn't optoisolated....
Hi Steve, which mount do you have - you didn't say? Do you have the small extender with the 4 RED LED lights on it? If so, you could check if the...
I had a fast look. Serial number of camera? Do you have original images from 2016? What software was used back in 2016 to acquire the images? What...
Things you might check: - Check for border-line low voltage at the camera if you can. Or test the power supply under load. - If the Lenovo has...
Ummm... sounds like a fundamental case of bad power, bad cabling, bad usb hub. I think you mean CCOPs 5.66 and SBIG Driver Checker 4.05 with...
Ok, so I see what you're referring to in the Blue image you produced with PixInsight. Flagged it with green boxes. [ATTACH] Hey @Doug when you...
Mike - where's the issue? eg column numbers / coordinate ranges. I had a fast look and I don't see anything major. I see two vertical lines cause...
Will, can you confirm is which camera model (e.g. Aluma CCD 47-10)? Do you know which FPGA firmware is in the camera? I've asked a colleague to...
Ok, that's good to hear.
Please contact @Bill for assistance. Email him at: bill (at) sbig (dot) com
For anyone reading this thread, the latest released firmware for the AC4040 is here:...
Hi Jonathan, We've posted a further FPGA firmware update for all AC4040 FSI and BSI cameras. I recommend that you get it and install it....
Ok.
Ok, It's not just the COM ports. The filter wheel is not on a com port, it is controlled by the camera directly. FTDI Chip makes a USB device that...
I expect it will be taken care of soon - I have asked my colleague who handles licensing to take care of it. Ok. Our engineers are investigating...
I'll request that. Ok, that's good news. Do the cameras and filter wheel connect now?
One other important fact: The older SBIG CCD cameras use SBIG Driver Checker, and the SBIG Universal Driver. The newer SBIG CMOS cameras use DL...
Separate names with a comma.
