If this is a USED (new to you) STT camera, and you've just installed it, it may have old firmware. Launch SBIG Driver Checker. Go to the Firmware...
Hi Mike, I think you may be seeing a gap between the window inside border and the end of the image. See the orange arrows: [ATTACH] If you look...
If the ST-I isn't getting sufficient power from the USB bus (it needs a port that can supply a full 500mA) it may not operate correctly. Check...
Congrats! You've spotted an error in the manual. We'll get this fixed.
Page on which manual? I can double check, and if an error, we will correct.
The correct settings: Camera 1 = AC4040 Camera 2 = SC-3. AO-X enabled on Sensor 1.
Venus may be far enough from the Sun right now to be usable.
Mark, another possibility is to set up MaxIm's capability to do Analyze... PinPoint Astrometry. You'll need a star catalog, such as UCAC4. Then...
Ever had a report of a missing MSVC component? Or a recently installed a program fails to start on a new or freshly reloaded computer? Under...
Greg, totally am impressed. The second one seems richer with the purple tone instead of more cyan, but I can't make up my mind which one I like...
I had a look at this as well. I suspect you've got fungus that formed as a result of the "biologicals", and it has somewhat eaten the coatings....
Problem was Camera 2 was set to a non-existent camera, so MaxIm failed to open that. Camera 1, the QHYCCD 600 worked fine.
I agree with Doug. It also looks like the fans and heatsinks are dirty, so service would be a good idea.
Try unplugging the USB and power to camera FIRST, then tryito update. Sometimes Windows will keep a file open.
Ok, let's go for then. Send me a PM tomorrow with you telephone number, and if you need it, I can send a link for TV QuickSupport.
Let me know what time you have in mind. I'm tied up from 2:30 to 5pm EST tomorrow.
MaxIm is indicating a problem with the second camera - and that is the cause of the error. Verify you have the first and second camera set up...
One other tip: Some users report certain ASCOM cameras are not thread-safe, so turn this ofF: [ATTACH]
Hi Peter, from the log, MaxIm is successfully connecting to Camera 1, the main camera. It is failing to connect to Camera 2, the guide camera. So,...
At least we didn't ask for dark-darks and dark-lights or polka-dot-darks. :confused: Have a good long weekend Eric.
Separate names with a comma.
