Alright, I realized the intermediate cable probably would realign the 12v signal so I rechecked at the camera end, it doesn't exactly match the...
I will go through the update utility and such. I've already made sure the usb selective settings were correct. This laptop has three usba 3.2,...
I tried downloading with the cooler off, no change. I'll check the Voltage of the PS with my meter.
Damn it. I was looking at the PS for the 10 micron. It's an Elpac 12v 12.5a.
I my Lenovo laptop is new so I downloaded the CCDopos version that is available. When I was downloading everything to the new laptop a week ago I...
Right now I am trying to take some flats. Having all sorts of connection issues. I can get the camera to connect in Maxlm 6.30 but it hangs up in...
No, Colin. Not the hot pixel. The deep and wide banding on the right, only gets worse when stacking. Here is a stack of six subs that really show it.
Take a look at an 300s image, the vertical banding on the right side. It only gets much more visible after stacking.
Hello, I was in contact with Bill and he suggested that my sensor is going bad and it's not an electronic issue. I know that a used sensor is my...
Well it looks like some of my past issues with this ao-x was caused by more than just software glitches. It looks like one side of the lens is...
You should really consider getting the Optec 0.62, much better quality with more back focus than the Meade 6.3. The Optec specifies 105mm back...
Colin, I resolved this issue. Not the software or the AO-X fault, it was (is) my mount. My guiding without the AO is bad as well, far worse than...
It might be comparing apples to oranges but I seem to remember with my Ao-8 the tracking speed number in the X and Y were in the 50-60 range....
Colin trying it out now, really don't see much of a difference. It took many try's but I did get to calibrate the AO, although it still not...
Yes somehow I reinstalled 5.0.2.0. I rolled it back to 4.99 build 7. I'll give it another try tonight, thanks.
Colin, I have the mount controlled using "telescope", not guider relays. I didn't try regular guiding with this set up. Although during mount...
No luck with my issue Colin. The plug in had no effect. I did notice tonight during calibration of the AO, I always got the message " Star moved...
I'll give it a try Colin, the weather should cooperate tonight.
Yes, it is an acf model.
I picked up a used STXL11k/ FW8G/AO-X recently, I have this mounted on my pier to a CEM120, /Meade 12" F8 (2438mm) and a Moonlight Litecrawler....
Separate names with a comma.
