Antonio, If it has the screws I think it does, a 1,3 metric or .050" Allen head wrench should do the trick. -Bill
Dick, Opening the camera to dry out might be a good way to allow any actual wetness to evaporate but when you put the cover back on, that section...
Had another camera owner tell me the same thing today, he got a "TX Timeout Error" message while updating the firmware in his STF.
Ok, send me that email.
Take off the back cover and check that they are both plugged in.
Thank you for clarifying. I would suspect the electronics more than the cooler itself. Although it has happened in the past, it is pretty rare for...
Frank, The serial number would have stayed the same and only the Model # would have changed. At the time that this camera was manufactured, the...
The fan stops when you push Maxim DL connect button? or just slows down? When you set cooling to -10, the percentage goes to 100% but the...
I'm glad to know it Bill, thanks.
and there are no parts left to repair them.
Yes, it sounds broken. Send me an email Dave, bill@sbig.com, and I'll give you details. -Bill
According to the database, it has the 4020. -Bill
It's not unheard of for the cooler in that model to fail. That's what it sounds like. Basically, you activate cooling and the temperature doesn't...
I think that both shutters opening when either is imaging is the norm.
"I'm still having the same issue with the main camera shutter activating during autoguider exposures. And now, when I take a main camera exposure,...
If I'm understanding this correctly... you're able to successfully acquire an image with either ccd , both the imaging ccd and the guiding ccd. If...
The camera arrived today, has been reflashed and is working again. It'll be headed home soon Dan.
I'd recommend measuring the output from the adapter. If I'm not mistaken, the orange/yellow light is a low volatge indication.
I'm not sure of any special requirements. I'd say to get a decent one, I wouldn't necessarily buy the cheapest one.
Perhaps you can try a different HDMI cable. I'm not so familiar with Maxim, is there an external guider option that should be selected?
Separate names with a comma.
