A quick six-panel mosaic of M42 region
RGB - 90 seconds stack of three for 270' total (stacked by the camera)
Scope TMB 80 with TV...
Wide field of M42, M43 and Running Man Nebulas:
Imaging Camera : STC-7
Guider Camera: SBIG 402ME
Imaging Scope: TMB 80/4800 with TeleVue 0.8...
Yet Another M42 via the STC-7
Widefield with a TMB-80/480 (f/6) of M42 and company.
While more of a test of the scope+STC combo to see the...
AP R-H scope (305mm f/3.8)
Processed in Maxim DL.
Transparency not so good.
Rosette taken with an AP R-H scope (305mm f/4.3) using AP 900.
Camera - STC-7 with 8 images/RGB channel at 3 minutes exposure each.
Here's M43 taken with STC-7 using 9 images for each RGB channel.
The color balance was derived from a G2V star which resulted in channel exposure...
Here's a 49 stack of M42 taken in h-alpha at 90 seconds/frame.
Maxim DL used 100% for everything including capture, focus and processing....
I was hoping to see on here if there are any updates on the status of the macOS and Ubunutu drivers.
Here is M101 taken with s short session (9 exp of 5 min each) using Maxim DL to capture.
Scope: 305mm @ f/3.7
CCD: STC-7 @ -25°C
Brand new STC-7 worked flawlessly on testing (per the manual). However, when I took it from the house to the observatory and performed the exact...
Attached is a, perhaps over processed, M42 taken with the STC-7. Not a lot of data collected due to figuring out how to work the separate guider...
The manual and the forums but can't see a spec for the maximum input DC voltage.
The manual states 12V-DC but no spec on max or min for that...
Does anyone know if CCD Autopilot and/or CCD Commander will be able to use the Stack Pro™ image capture. Will either program be able to kick off...
Separate names with a comma.