I do not know the choice of built-in filter

Discussion in 'STF Series' started by NagaiKazuo, Jul 14, 2019.

  1. NagaiKazuo

    NagaiKazuo Standard User

    Joined:
    Jul 14, 2019
    Messages:
    3
    I am using MaxIMDL.
    And I attached CFW-402 to STF-402.
    There is no CFW-402 in the filter section.
    What should I do now?
     
  2. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    5,717
    Just select SBIG Universal for the filter wheel driver. Then set Model to Standard. That setting is used for all modern SBIG wheels.
     
  3. NagaiKazuo

    NagaiKazuo Standard User

    Joined:
    Jul 14, 2019
    Messages:
    3
    Thank you very much.
    I tried it.
    The filter position has shifted.
    It may be a failure.
     
  4. Tim

    Tim Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    1,561
    I am not sure what you mean by the "filter position has shifted". Can you send a screenshot of what you are seeing in MaxIM DL?
     
  5. NagaiKazuo

    NagaiKazuo Standard User

    Joined:
    Jul 14, 2019
    Messages:
    3
    Do you understand this picture?
    I use MaxIM DL and CCDOPS.
    MaxIMDL is a trial version.
     

    Attached Files:

Share This Page