ST-2000XM will not connect to CCDSoft

Discussion in 'STF Series CCD Cameras' started by Robert Rosenstein, Aug 18, 2015.

  1. Robert Rosenstein

    Robert Rosenstein Standard User

    Joined:
    Aug 18, 2015
    Messages:
    2
    My ST-2000XM camera no longer connects to CCDSoft v5. I downloaded the current drivers and made sure the camera was seen in device manager with no conflicts. It works well with CCDops v5, but not CCDSoft v5. I tried re-loading the CCDSoft program and nothing. Any help would be appreciated.

    Bob Rosenstein
     
  2. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    8,519
    Since the camera work properly in CCDOPS, there is nothing wrong with the camera or drivers. CCDSoft is a Software Bisque product. I recommend you contact them for technical support on CCDSoft.
     
  3. Robert Rosenstein

    Robert Rosenstein Standard User

    Joined:
    Aug 18, 2015
    Messages:
    2
    I did that. They suggested that the problem was in the camera. I just ordered a new USB cable from SBIG (Bill Lynch) and it was suggested that I post this issue here. Not sure what to do next!
     
  4. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    8,519
    If the camera works correctly in CCDOPS, then it is pretty clear the problem is not with the camera!
     

Share This Page