ST-6 Cable Camera Head <-> Control Box

Discussion in 'STF Series CCD Cameras' started by StefanP, Oct 5, 2015.

  1. StefanP

    StefanP Standard User

    Joined:
    Oct 5, 2015
    Messages:
    2
    Dear all,

    recently I bought a used ST-6. It is in good working condition and I really enjoy guiding with it. However, the cable between the camera head and the control box became very stiff over the years. Soldering a new cable would be no problem. My question: Is there a wiring diagram available, respectively is there anything I need to pay attention? Thanks a lot in advance!

    Best regards from Germany,

    Stefan
     
    StefanP, Oct 5, 2015
    #1
  2. Tim Puckett

    Tim Puckett Guest

    Tim Puckett, Oct 5, 2015
    #2
  3. StefanP

    StefanP Standard User

    Joined:
    Oct 5, 2015
    Messages:
    2
    Hi Tim,
    many thanks for your reply! Actually I can´t find the cable between control box and camera head on the mentioned pages. Am I overlooking something?
    Best regards,
    Stefan
     
    StefanP, Oct 11, 2015
    #3
  4. Bill

    Bill SBIG Service and Repairs Staff Member

    Joined:
    Oct 12, 2014
    Messages:
    527
    The old SBIG website can be found at archive.sbig.com, no www (at least on my computer), although I couldn't find a drawing for the ST-6 Head Cable anywhere.
     
    Bill, Oct 15, 2015
    #4
  5. ford91exploder

    ford91exploder Standard User

    Joined:
    Oct 31, 2015
    Messages:
    1
    Here is a diagram I found for the cable
    upload_2015-10-31_13-45-37.png
     
    ford91exploder, Oct 31, 2015
    #5

Share This Page