STF 8300m Camera struggling to cool

Discussion in 'STF Series CCD Cameras' started by Rado4213, Aug 25, 2020.

  1. Rado4213

    Rado4213 Cyanogen Customer

    Joined:
    Dec 29, 2014
    Messages:
    9
    Hi ,

    Its 83 degrees trying to cool to -10c is that possible....its stuck at -6.9c and at 100%

    Thanks

    Dan
     
  2. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    7,430
    Location:
    Earth
    Hi Dan, let's do the math.
    83F is 28.3C.
    28.3 - -6.9 = 35.2C delta T.
    That's the top end of what the STF can cool (usually it is closer to 30C). So the camera cannot cool any further.
    You're asking too much of the cooler by trying to get to -10C in that kind of heat.
    This is better suited to an Aluma 8300 which has SmartCooling, dual fans, and a higher performance heat sink arrangement.
    The STF-8300EN might get you a couple more degrees.
     
    Bill likes this.

Share This Page