STX remote guide head back focus

Discussion in 'Specialty Cameras SG-4, AllSky, ST-I' started by svastro, Dec 1, 2015.

  1. svastro

    svastro Standard User

    Joined:
    Nov 27, 2015
    Messages:
    4
    Hello - does anyone know where I can find the back focus of the STT/STXL/STX? I need to calculate spacing requirements for the MMOAG with STX16803 and FW7-STX
    Nir.
     
  2. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    7,291
  3. svastro

    svastro Standard User

    Joined:
    Nov 27, 2015
    Messages:
    4
    Is that the ST-i?
     
  4. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    7,291
    ST-I is in the table (and it's the same as the remote guide head - basically the remote guide head is an ST-I missing most of its electronics.)
     
  5. svastro

    svastro Standard User

    Joined:
    Nov 27, 2015
    Messages:
    4
    Thanks a lot. While we're at it, how do I attached the AO-X to the scope side of the MMOAG (i.e. in front of the of-axis guide scope) which itself is in front of the FW7-STX? The AO-X manual says "The AO-X is designed to be bolted directly to the front of your STXL or STX camera".
    Thanks a lot for the help before placing my order...
    Nir.
     
  6. Tim Puckett

    Tim Puckett Guest

    Hi Nir,

    You can place the MMOAG between the FW7 and AO-X.

    You need an adapter for the MMOAG at Preciseparts.com
    I have attached the PDF where you can create and order the adapter.
    Also a picture of the adapter.

    You can reach me by Skype, email or phone most anytime if you need more assistance.
    Let me know, happy to help.
    Cheers
    Tim
     

    Attached Files:

Share This Page