STXL filter wheel giuding issue

Discussion in 'STX and STXL Series Cameras' started by stefano pesci, Sep 4, 2018.

  1. stefano pesci

    stefano pesci Cyanogen Customer

    Joined:
    Mar 15, 2015
    Messages:
    12
    Hi Doug,

    if the guiding star during calibration moves only in Y and not in X, what could be the issue? The cable, Maxim 6.18 configuration?
    Thanks stefano
     
  2. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    8,393
    99% probability it's the cable. Check for damage. Those RJ-12 connectors are not the most robust.

    There is a setting under Guider Settings to turn on/off each axis. That's also a possibility, though less likely assuming you don't hit buttons at random. ;)
     

Share This Page